Philips DVDR890/021 User Manual page 72

1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming method last selected is marked.
3
Select '
The current information will appear on the screen.
4
Select the input field with D or C .
5
Enter information with B or A or with the number buttons 0..9 .
In ' ' use SELECT to select from the following options:
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g. Monday).
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('
' input field using TIMER . Using SELECT switch on
Select the '
'VPS/PDC' (' ' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (' ' disappears).
' input field using TIMER .
Select the '
Using SELECT , select the recording mode'
6
If all the information is correct, press OK . The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Load a DVD (unprotected) ready for recording.
The disc is checked.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, 's' will light up on the display.
' with B or A . and confirm with C .
') or EXT 2 AUX I/O ('
').
, ,
using the STANDBY m button.
Programming a recording (TIMER)
, , , '.