Philips DVDR890/021 User Manual page 13

Hide thumbs Also See for DVDR890/021:
Table of Contents

Advertisement

Because of the risk of eye injuries, only qualified service engineers should open the machine and
carry out maintenance or repair work.
Typ: InGaAlP (DVD), AlGaAs(CD) semiconductor laser
Wavelength: 660nm (DVD), 780nm (CD)
Output power (outside the lens): 20mW (DVD+RW write), 0.8mW (DVD read), 0.3mW (CD
read).
Beam divergence: 82 Grad (DVD), 54 Grad (CD)
The machine does not contain any user-serviceable parts. Please leave all maintenance work to
qualified personnel.
There are some components in the DVD recorder that keep running as long as the recorder is
connected to the power supply. To switch off the DVD recorder completely you must unplug it
from the power supply.
If you disconnect the DVD recorder from the mains, make sure to pull out the mains plug from the
wall outlet and not only the plug from the socket 4MAINS at the back of the unit. Children
playing near the device could suffer injuries at the free end of the cable.
These operating instructions have been printed on non-polluting paper.
Please dispose of old batteries safely.
Please take the packaging to your local recycling centre.
This electronic equipment contains a large number of materials that can be recycled. If you are
disposing of an old machine, please take it to a recycling centre.
Introduction

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvdr 890/001Dvdr 890/021

Table of Contents