Philips DVDR890/021 User Manual page 31

Installing your DVD recorder
In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON .
3
Press SYSTEM-MENU on the remote control. The menu bar
appears.
4
' using D or C .
Select '
5
' using B or A and confirm with C .
Select '
6
Select '
7
', select the desired display using C
In '
: Display/entry of frequencies
: Display/entry of channels
: Display/entry of special channels
TV signals are transmitted in certain pre-defined frequency ranges. These
ranges are divided into channels. A specific frequency/channel is assigned to
each TV station. Certain frequency ranges are specified as special channels
(hyperband channels).
8
In ' ', enter the frequency or channel of the TV station
using the number buttons 0..9 .
a
b In this case, press C to start the automatic search. A changing channel
number/frequency number will appear on the TV screen.
Continue the automatic search until you have found the TV channel you
are looking for.
' using B or A and confirm with C .