Haier HSVCD24 User Manual page 12

English
Replacing Light Bulb
All parts must be saved when replacing the light bulb. Before removing the light bulb, either turn off
the appliance or disconnect the power source. Failure to do so could result in electrical shock or
personal injury.
• Remove the screw (1). (Fig 1)
• Remove the lamp cover (2) in the direction of the arrows. (Fig 1a)
• Unscrew the bulb (4). (Fig 2)
• Replace with equivalent 15-watt bulb.
• Reassemble the lamp cover (2): Insert tab "A" on lamp cover into slot "B" on electrical box,
then fasten with a screw.
1
2
11
1) Screw
2) Lamp Cover
3) Electrical Box
4) Bulb
5) Lamp Holder
1a
2a