Table of Contents
Advertisement
PROGRAM SELECTION (FROM 0 TO 99)
Direct selection
Use the remote control NUMBER 0...9 buttons (A2).
For two digits program numbers, enter the second digit
within 2 seconds.
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME UP (A6) / DOWN (A9) buttons or the TV set front panel VOLUME UP / DOWN buttons (B3).
Mute
Mute the sound by pressing the remote control SOUND MUTE button (A10).
Then, logo is displayed. The previous sound setting is returned after pressing
the same button a second time.
If a sound related function is used (e.g. VOLUME) then the MUTE will also be cancelled.
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A3) :
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the
PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
01 BBC1
NORMAL I
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control SLEEP
button (A12), you can enter one of the following settings :
OFF
20 min
40 min
01 BBC1
The SLEEP time remaining (before TV turn-off ) can be seen again at any time by one
touch on the remote control SLEEP button (A12).
A second touch (while the status display is active) will modify the SLEEP time remaining.
01 BBC1
NORMAL II
60 min
80 min
100 min
18:30
Remaining time (minutes)
before TV set switches off
20
Up / Down selection
Use the remote control PROGRAM UP (A5) / DOWN (A8) but-
tons or the TV set front panel PROGRAM UP / DOWN buttons
(B2).
01 BBC1
FAVOURITE
120 min
OFF
7
Advertisement
Table of Contents
