Features Menu - Daewoo 15U7LT Instruction Manual

FEATURES MENU

See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 8, HOW TO USE THE SUB-MENUS)
1. When switched to ON:
Prevents the use of the TV set without remote control
2. Wake up function
This function is only selectable when the clock is set.
The TV set turns on from stand-by at the WAKE TIME
with the programme entered on the WAKE PROG. line.
Put the TV set on stand-by with the remote control
3. Shared with WAKE TIME.
4. TV clock setting
This function allows user to enter the time manually.
Note : If you turn off the set with the main power button,
the clock setting is lost. An automatic attempt is
made to set the clock again at power on.
5. LANGUAGE menu entry.
LANGUAGE MENU
- Select the preferred LANGUAGE by use of the CURSOR LEFT (A9), RIGHT (A6) buttons, and the CURSOR UP (A5) or DOWN (A8)
buttons.
- Press the OK button (A3) to confirm the selection (the choice will be highlighted in red).
Note : The languages shown are subject to modification without prior notice.
FEATURES FEATURES
CHILD LOCK OFF
WAKE TIME OFF
WAKE PROG. 04
CLOCK - -:- -
CLOCK PROG 01
LANGUAGE GB
LANGUAGE LANGUAGE
BG CZ D DK E
F FIN GB GR H
I N NL P PL
RO RUS S
11
1. Adjust this value ON or OFF.
- In stand-by mode, the stand-by indicator blinking red to
indicate the CHILD LOCK is set.
- The front panel TV buttons (B2, B3, B4) become inactive
and the TV will only respond to the remote control.
2. Switch the WAKE UP function OFF or 'ON' (the time will
be shown e.g. 07:15) with the remote control CURSOR
LEFT (A9) /RIGHT (A6) buttons
- Enter the wake up time with the remote control 0...9
NUMBER (A2) buttons.
3. Adjust TV turn-on program number
4. Adjust TV clock. Clock will start at 0 seconds upon entry
of the 4th figure.
The prog. no. which can be used to automatically seize
the time at turn on can be entered here.
5. The currently selected LANGUAGE is displayed. Press
the OK button (A3) to access the menu and change the
selection.