Daily Use; Selecting A Programme Number; Volume, Picture And Sound Control - Daewoo 2594ST Instruction Manual

DAILY USE

SELECTING A PROGRAMME NUMBER

The set has a total of 70 programme numbers, 0..69.
The NUMBER button 0..9 are used for direct programme selection.
In order to select two-digit programm, press the second numbered button
within two seconds.
Switch through the programme number step by step with the UP/DOWN
button.

VOLUME, PICTURE AND SOUND CONTROL

VOLUME CONTROL
Adjust the volume with the VOLUME (
front of the set, or with the LEFT/RIGHT button on the remote control.
MUTE
Pressing the MUTE button (
The sound returns if the button is pressed once more or the programme
no. is changed.
NORMAL PICTURE SELECTION
When you press the NORMAL button repeatedly you can call up three pic-
ture settings;
for NORMAL I(hard picture), NORMAL II(soft picture), FAVOURITE
(adjustable picture).
PICTURE CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button to call up the PICTURE MENU.
You can select each function with the UP/DOWN buttons.
Use the LEFT/RIGHT button adjust each function:
BRIGHTNESS( )-CONTRAST(
-SHARPNESS( )-TINT(
* The TINT is active only in NTSC system.
The last set value is automatically stored in FAVOURITE mode.
Note that if you set the brightness and contrast values too low, the On-
screen-display become dark.
SOUND CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button on the SOUND line.
Select the required function by moving the cursor with the DOWN or UP
button. Use the LEFT or RIGHT button to adjust the level of each function.
1. BASS
Used to increase or decrease the bass of sound.
2. TREBLE
Used to increase or decrease the treble of sound.
3. BALANCE
Adjust the balance for the best stereo effect for your room conditions.
4. PSEUDO
Used to obtain a pseudo stereo effect with mono transmissions.
) DOWN/UP buttons on the
) once turns the sound off.
)-COLOUR(
).
)
PICTURE
31
63
31
31
00
SOUND
16
16
00
7