Table of Contents
Advertisement
DAILY USE
SELECTING A PROGRAMME NUMBER
The set has a total of 70 programme numbers, 0..69.
The NUMBER buttons 0..9 are used for direct programme selection.
In order to select two-digit programm, press the second numbered
button within two seconds.
Switch through the programme number step by step with the
UP/DOWN buttons.
VOLUME, PICTURE AND SOUND CONTROL
VOLUME CONTROL
Adjust the volume with the VOLUME (
on the front of the set, or with the LEFT/RIGHT buttons on the
remote control.
MUTE
Pressing the MUTE button (
The sound returns if the button is pressed once more or the pro-
gramme No. is changed.
NORMAL PICTURE SELECTION
When you press the NORMAL button repeatedly you can call up
three picture settings:
for NORMAL I(hard picture), NORMAL II(soft picture), FAVORITE
(adjustable picture).
PICTURE CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button to call up the PICTURE MENU.
You can select each function with the UP/DOWN buttons.
Use the LEFT/RIGHT buttons adjust each function:
BRIGHTNESS(
)-CONTRAST(
-SHARPNESS(
)-TINT(
* The TINT is active only in NTSC system.
The last set value is automatically stored in FAVORITE mode.
Note that if you set the brightness and contrast values too low,
the On-Screen-Display become dark.
SOUND CONTROL
Press the MENU button to call up the MAIN MENU.
Press the OK button on the SOUND line.
Select the required function by moving the cursor with the DOWN
or UP buttons.
Use the LEFT or RIGHT button to adjust the level of each function.
1. BASS
Used to increase or decrease the bass of sound.
2. TREBLE
Used to increase or decrease the treble of sound.
3. BALANCE
Adjust the balance for the best stereo effect for your room conditions.
4. PSEUDO
Used to obtain a pseudo stereo effect with mono transmissions.
) DOWN/UP buttons
) once turns the sound off.
)-COLOUR(
)
).
10
PICTURE
31
63
31
31
00
SOUND
16
16
00
Advertisement
Table of Contents
