Table of Contents
Advertisement
DAILY USE
The RECALL button is used to display the current status:
programme number, station name, sound system, clock.
This display appear for 2 seconds.
SELECTING A PROGRAMME NUMBER
The set has totally 100 programme numbers, 0..99.
The NUMBER buttons 0..9 are used for direct programme selection.
To select two-digit programme, press the second numbered button within
two seconds.
You can also select a programme number by pressing step by step the
UP/DOWN buttons.
PICTURE CONTROL
BRIGHTNESS,CONTRAST,COLOUR, SHARPNESS
• Press the MENU button.
• Press the RIGHT button to call up the Picture menu.
• You can select each function with the UP / DOWN buttons.
• The levels of each function can be adjusted the LEFT / RIGHT buttons
to suit your viewing conditions, the lightning conditions of the room and
your preference.
For Hue control Tint is displayed only when receiving a NTSC signal
from external jack.
The adjusted levels are stored automatically at Favourite mode.
NOISE REDUCTION (NR)
NR will reduce unwanted picture interference In NR(Noise reduction) menu
you can select one of
"Off, Auto, Medium, High"
Smart Picture Selection
When you press the NORMAL button repeatedly you can call up three pic-
ture settings stored in memory :
I
NORMAL
-> NORMAL
(hard picture) (soft picture)
SOUND CONTROL
VOLUME CONTROL
Adjust the volume with the VOLUME(
front of the set, or with the LEFT/RIGHT button on the remote control.
MUTE
Pressing the MUTE(
) button to turns the sound off.
The mute symbol will be displayed. The sound returns
if the button is pressed once more.
RECALL
II
-> FAVOURITE ->
(user adjustable)
) DOWN / UP buttons on the
7
Picture
Brightness
Contrast
Colour
Sharpness
NR
Brightness
21
Volume
21
Advertisement
Table of Contents
