Before Setting Oven Controls; Oven Vent Location; Arranging Oven Racks - Frigidaire 316000635 Owner's Manual

Before Setting Oven
Controls

Oven Vent Location

The oven is vented under the left rear surface element. When the oven is on,
warm air is released through the vents. This venting is necessary for proper air
circulation in the oven and good baking results.

Arranging Oven Racks

(Some models may have one rack.) ALWAYS ARRANGE OVEN RACKS WHEN THE
OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when
using the oven.
REMOVING &
REPLACING OVEN RACKS
To remove, pull the rack forward until
it stops. Lift up front of rack and slide
out. To replace, fit the rack onto the
guides on the oven walls. Tilt the front of
the rack upward and slide the rack back
into place.
8
ARRANGING OVEN RACKS WITH
5 RACK POSITIONS
To bake on one rack, place the rack on
position 3 or 4. To bake on two racks
(some models), place the racks on po-
sitions 2 and 4.