Changing The Light Bulb - AEG 8259 D Installation And Operating Instructions Manual

Warning
Failure to observe the instructions on maintenance and cleaning,
and changing the filters will cause a fire hazard. You are therefore
strongly recommended to follow these instructions.
The manufacturer declines all responsibility for any damage to the
motor or any other damage linked to inappropriate maintenance
or failure to observe the above safety recommendations.

Changing the light bulb

Disconnect the unit from the
mains power supply.
Remove the lamp cover.
Replace the old light bulb with a new
light bulb (40 W
max.).
Fit the lamp cover on its seat.
If the light does not come on, make
sure the bulb has been screwed in
correctly before contacting AEG
Service Force..
Fig. 6
15