Reversing The Door - AEG ARCTIS A75238-GA Operating Instructions Manual

1. The wire coloured green and yellow must be connected to the ter-
minal marked with the letter "E" or by the earth symbol
oured green and yellow.
2. The wire coloured blue must be connected to the terminal "N" or
coloured black.
3. The wire coloured brown must be connected to the terminal marked
"L" or coloured red.
4. Upon completion there must be not cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheat.
1
Warning! A cut-off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

Reversing the door

The door hinges can be changed from right (as supplied) to left if
required to suit the location where the appliance is installed.
1
Warning! Unplug from the mains before reversing the door.
0
1. Open the door and remove the
plinth cover to the front. Move
the door hinge bracket cover on
the plinth cover from the left to
the right. Close the door.
2. With the door closed, remove the
cross-head screws from the lower
door hinge bracket and remove
the door hinge bracket down-
wards.
818 22 92-00/6
or col-
11