Reversing The Door - AEG ARCTIS Operating Instructions Manual

Installation

Reversing the door

The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appli-
ance must not be connected to the mains. Remove plug from the
mains beforehand.
1. Tilt the appliance slightly towards the
rear and prop it securely.
2. Pull off the ventilation grille, which is
a clip-on fit.
3. Unscrew the door hinge screws (K) and
remove the
out of its cavity..
4. Open the door a little way and take it out
downwards.
5. Unscrew the upper pin (2) and screw it
into place on the opposite side.
6. Fit the door into the upper pin (2) and
close it.
32
door bracket (1) downwards
AEG58
AEG59/1
12 mm
2
1
K