Before installing and using the appliance read this user's instruction book carefully. It contains safety precautions, hints, information and ideas. If the refrigerator is used in compliance with the instructions written, it will operate properly and provide you with greatest satisfaction. The symbols below help you to find things more easily: Safety precautions Warnings and information at this symbol serve safety for you and your appliance.
Important safety information General safety precautions Do not store flammable gas and liquid in the appliance because they may explode. This appliance is heavy. Care should be taken when Do not put carbonated drinks, bottled drinks and moving it. bottled fruits into the freezer. Keep these instructions.
Instructions for the User General information The official designation of the appliance is home freezing. The appliance can meet the requirements of standards According to this the appliance is suitable for storing between different temperature limits according to the frozen and deep-frozen food, freezing products in quantity climate class.
Switches and indicators Under normal operating conditions it displays the actual temperature (CURRENT temperature) of the ( A ) On/off indicator (green) freezer. ( B ) On/off switch At the time of setting the temperature, the freshly set ( C ) Thermostat button (for higher temperatures) temperature (DESIRED temperature) will flash.
Storing Hints and ideas It is practical to replace frozen products into the storing In this chapter practical hints and ideas are given about compartments after freezing has finished so that to make how to use the appliance to reach maximum energy saving room in the freezing compartment for another freezing.
Regular cleaning Leave the doors ajar to avoid the build-up of unpleasant odors. Never use soap or abrasives for cleaning. Trouble shooting Once is it disconnected from the mains, wash the product with lukewarm water and then wipe it dry. A malfunction may be caused by only a minor fault that Use clean water to clean the door sealing gasket.
Instructions for the Installer Installing the appliance When placing the appliance ensure that it stands level. This can be achieved by the two adjustable feet (1) bottom front two. 1-1 piece of distance washers (2) are accessories Transportation, unpacking It is recommended to deliver the appliance in its original packaging, in a vertical position.
Change of door opening direction Should the setting-up place or handling demand it, door- opening direction can be refitted from the right hand side to the left hand side. Following operations are to be done on the basis of figures and explanations: Pull out the plug from the mains socket.
Technical Terminology Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Refrigerant Important! The plug must still be accessible after Liquids that can be used to a generate a cooling the appliance has been installed.
Electrical connection This appliance complies with the following E.E.C. Directives: This refrigerator is designed to operate on a 73/23 EEC of 19.02.73 (Low Voltage Directive) and 220-240 V AC (~) 50 Hz supply. subsequent modifications, The plug must be put into a socket with protective 89/336 EEC of 03.05.89 (Electromagnetic Compatibility contact.