Operating instructions A 75100 GA3 Freezer A/AE/4-2. (08.) PERFEKT IN FORM AND FUNKTION 200382011...
Before installing and using the appliance read this user's instruction book carefully. It contains safety precautions, hints, information and ideas. If the refrigerator is used in compliance with the instructions written, it will operate properly and provide you with greatest satisfaction. The symbols below help you to find things more easily: Safety precautions Warnings and information at this symbol serve safety for you and your appliance.
Important safety information General safety precautions This appliance is heavy. Care should be taken when moving it. Keep these instructions. They should remain with the appliance when moving away or changing owner. This appliance is designed for storing and freezing food, domestic use according to these instructions only.
General information The official designation of the appliance is home freezing. According to this the appliance is suitable for storing frozen and deep-frozen food, freezing products in quantity given in the user's instructions at home and making ice. General safety precautions 1.
Switches and indicators ( A ) On/off indicator ( B ) On/off switch ( C ) Thermostat button (for higher temperatures) ( D ) Temperature display ( E ) Thermostat button (for lower temperatures) ( F ) Alarm indicator ( G ) ACOUSTIC alarm OFF switch (see "Control and information system") ( H ) QUICK FREEZE indicator ( J ) QUICK FREEZE pushbutton switch...
Storing It is practical to replace frozen products into the storing compartments (drawers) after freezing has finished so that to make room in the freezing compartment for another freezing. Intermediate freezing does not deteriorate foods already stored. How to make ice cubes To make ice cubes fill the enclosed ice cube tray with water and place it to the frozen food compartment.
Regular cleaning Never use soap or abrasives for cleaning. Once is it disconnected from the mains, wash the product with lukewarm water and then wipe it dry. Use clean water to clean the door sealing gasket. After the cleaning operations, reconnect the product to the mains.
Installing the appliance Transportation, unpacking It is recommended to deliver the appliance in its original packaging, in a vertical position. After each transportation the appliance must not be switched on for approx. 2 hours. Unpack the appliance and check if there are damages on it.
Change of door opening direction Should the setting-up place or handling demand it, door- opening direction can be refitted from the right hand side to the left hand side. Following operations are to be done on the basis of figures and explanations: Pull out the plug from the mains socket.
Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Important! The plug must still be accessible after the appliance has been installed. The appliance should not be connected to the electrical supply by means of an extension cable.
Electrical connection This refrigerator is designed to operate on a 220 V - 240 V AC (~) 50 Hz supply. The plug must be put into a socket with protective contact. If there is no such, it is recommended to get an electrician to fit an earthed socket in compliance with standards near the refrigerator.
14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg Sie können Ersatzteile, Zubehör und Pflegemittel on-line bestellen bei http://www.aeg-electrolux.de www.electrolux.com www.aeg-electrolux.co.uk © Copyright by AEG 200382011- 02 - 2408 Subject to change without notice...