Gpu Heat Sink - Packard Bell iPower GX Disassembly Manual

5. Remove the screws securing the main board.
6. Carefully lift out the main board.
Note: During re-assembly of the main board, make sure that the small black switch on the main board fits within
the slot on the wireless network on/off switch.

GPU Heat Sink

To remove the GPU heat sink, first remove the main board (see Main Board on page 28), and then
perform the following steps:
Fig. 73 Location of the main board screws.
Fig. 74 Extracting the main board.
Fig. 75 Wireless LAN switch.
Packard Bell iPower GX Disassembly Manual
30