Battery; Memory - Packard Bell iPower GX Disassembly Manual

Battery

Perform the following steps to remove the battery:
1. Make sure the power to the system is off.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Turn the notebook upside down.
Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to
the exterior of the notebook.
4. Slide the battery lock/unlock latch into the unlock position.
5. Slide the battery release latch into the release position and slide the battery out of the unit.

Memory

To remove the memory installed, first remove the battery (see Battery on page 4) and then perform
the following steps:
1. Loosen the screws securing the CPU bay cover (the screws cannot be removed).
Fig. 1 Releasing the battery.
Fig. 2 Removing the battery.
Fig. 3 Location of the CPU bay cover screws.
Packard Bell iPower GX Disassembly Manual
4