Packard Bell iPower GX Disassembly Manual page 23

22
1. Slide the brown touchpad connector clip to the back of the notebook and remove the flat
cable from the header.
Fig. 50 Releasing the touchpad flat cable.
2. Turn the notebook over so the bottom is facing up.
3. Remove the screws from the bottom of the notebook.
Fig. 51 Location of the top cover screws (bottom).
4. Turn the notebook over so the top is facing up.
5. Remove the screws from the top of the top cover.
Fig. 52 Location of the top cover screws (top).
Note: Note the location of the screw types and sizes.
Packard Bell iPower GX Disassembly Manual