Touchpad Board - Packard Bell iPower GX Disassembly Manual

6. Lift the top cover assembly up from the notebook.

Touchpad Board

To remove the touchpad board, first remove the top cover (see Top Cover on page 21) and then
perform the following steps:
1. Turn the top cover over so the backside is facing up.
2. Remove the screws from the touchpad board bracket.
3. Remove the screws from the touchpad button board bracket.
Fig. 53 Removing the top cover.
Fig. 54 Location of the touchpad board bracket screws.
Fig. 55 Location of the touchpad button board bracket screws.
Packard Bell iPower GX Disassembly Manual
23