Removing the Touchscreen Control Board
1.
Remove the PSU by following the procedure described on page 49.
2.
Detach the black tape from the touchscreen control board cables.
3.
Push the tabs securing the touchscreen control board.
4.
Remove the touchscreen control board and turn it over to expose the cable connectors underneath it.
A circuit board that is >10 cm
above image. Follow local regulations for disposing this type of circuit board.
Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide
2
has been highlighted with a yellow rectangle as shown in the
51