Removing The Wall Mount Plate - Packard Bell oneTwo M3350 Service Manual

Removing the Wall Mount Plate

1. Remove the rear cover by following the procedure described on page 28.
2. Remove the screws securing the wall mount plate.
Quantity
2
3. Slide the wall mount plate towards the HDD area to disengage the plate tabs from the main chassis, then
remove the wall mount plate.
Packard Bell oneTwo M3350 / oneTwo M3351 / oneTwo L5350 / oneTwo L5351 Service Guide
Color Torque
Black 4.0–4.5 kgf-cm
Part Number
86.00B75.240
35