Removing The Battery; Removing The Memory Module - Packard Bell EasyNote L Disassembly Manual

Removing the Battery

Perform the following steps to remove the battery:
i. Make sure to power off the EasyNote L.
ii. Disconnect the AC adapter and all peripherals.
iii. Turn the unit over.
iv. Unlock the battery and slide it out.

Removing the Memory Module

To remove the memory module, first remove the battery (see
following steps:
1. Remove the screw securing the memory compartment cover.
ii. Release with your fingers the side locks located on the memory slot. As you release the
locks, the module will automatically pop up and stay in a 45º angle position.
Fig. 1 Releasing the battery.
Fig. 2 Memory compartment cover screw location.
Packard Bell EasyNote L Disassembly Manual
Removing the Battery), then perform the
4