Raymarine ST1000 Plus Tiller Pilots Owner's Handbook Manual page 20

16
5. Check that it is safe to turn the boat onto the new course.
6. Press -10 and +10 together:
7. The display will continuously cycle through the following
Manual track acquisition
If your navigator only provides cross track error information, you
must acquire the track manually:
1. Steer the boat to within 0.1 nm of track.
2. Bring the heading to within 5° of the bearing to the next waypoint.
3. Press auto .
4. Press -10 and +10 together to enter Track mode:
ST1000 Plus & ST2000 Plus Tiller Pilots - Owner's Handbook
• the boat will now turn on to the new course
• the alarm will cancel
navigation information pages:
• the autopilot will start tracking to the waypoint
• the display will alternate between cross track error and the
locked pilot heading
Waypoint
at 058˚
Locked heading
Distance to waypoint
(if available)
Bearing to waypoint
(if available)
Cross track error
D3257-2
D178-2