Chapter 1 - Product Overview - Siemens BACnet ATEC Owner's Manual

Chapter 1 – Product Overview
Siemens Industry, Inc.
125-5050, Rev. AA
The BACnet Actuating Terminal Equipment Controller (ATEC) is the Siemens Industry
FLN controller used in pressure independent Variable Air Volume applications (See the
following figure.). It provides Direct Digital Control (DDC) for eight applications, and
can operate independently as a stand-alone DDC room controller or networked with a
field panel. The controller provides all input/output, system, and local communication
connections. Hardware consists of the controller and the mounting bracket.
Table 1 lists the BACnet ATEC products that are covered:
Table 1. BACnet ATEC – Electronic Output Applications.
Application Number
2860
2861
2862
2863
2864
2865
2866
2867
2897
Ordering Notes
Part Number Description
550-440 BACnet ATEC Model 0001, cooling only (GDE)
550-441 BACnet ATEC Model 0001, cooling only (GLB)
550-445 BACnet ATEC Model 2301, full feature (GDE)
550-446 BACnet ATEC Model 2301, full feature (GLB)
Chapter 1 – Product Overview
Application Description
VAV Cooling Only
VAV Cooling or Heating
VAV with Electronic Reheat or Baseboard
Radiation
VAV with Hot Water Reheat
VAV Series Fan Powered with Electric Reheat
VAV Series Fan Powered with Hot Water
Reheat
VAV Parallel Fan Powered with Electric
Reheat
VAV Parallel Fan Powered with Hot Water
Reheat
Slave Mode
BACnet ATEC Owner's Manaul
9
4/20/2010