Table of Contents
Advertisement
SIEMENS 5930/5935 Business Gateway
User's Guide
9. In Destination IP Address, enter the IP address of the remote private network to which your router will
connect using this policy.
10. In Destination Subnet Mask, enter the subnet mask of the remote private network to which your router
will connect using this policy.
11. In Source Port, enter the port that will be the source of TCP/UDP traffic under this policy. You can specify
All ports, a port number, or an IP application associated with a particular port. Because port numbers are
TCP and UDP specific, a port filter is effective only when the protocol filter is TCP or UDP.
12. In Destination Port, enter the port that will be the destination of TCP/UDP traffic under this policy. You
can specify All ports, a port number, or an IP application associated with a particular port.
13. Click Apply.
SIEMENS
Chapter 6 Security Setup
IKE/IPSec Configuration
79
Advertisement
Table of Contents
