Certificates And Approvals - Siemens simatic PCIL43 Operating Instructions Manual

Appendix
A.2 Certificates and approvals
A.2

Certificates and approvals

A.2
DIN ISO 9001 certificate
The quality assurance system for the entire product process (development, production, and
marketing) at Siemens fulfills the requirements of ISO 9001 (corresponds to EN29001:
1987).
This has been certified by DQS (the German society for the certification of quality
management systems.)
EQ-Net certificate no.: 1323-01
Software License Agreement
The device is shipped with preinstalled software. Please observe the corresponding license
agreements.
Certification for the USA, Canada and Australia
Safety
One of the following markings on a device is indicative of the corresponding approval:
A-2
Underwriters Laboratories (UL) to UL 60950 Standard (I.T.E), or to UL508
(IND.CONT.EQ)
Underwriters Laboratories (UL) according to Canadian standard C22.2 No. 60950
(I.T.E) or C22.2 No. 142 (IND.CONT.EQ)
Underwriters Laboratories (UL) according to standard UL 60950, Report E11 5352 and
Canadian standard C22.2 No. 60950 (I.T.E) or UL508 and C22.2 No. 142
(IND.CONT.EQ)
UL recognition mark
Canadian Standard Association (CSA) according to the standard C22.2. No. 60950 (LR
81690) or C22.2 No. 142 (LR 63533)
Canadian Standard Association (CSA) to the American Standard UL 60950 (LR 81690),
or to the UL 508 (LR 63533)
Operating Instructions, Edition 09/2005, A5E00432875-01
SIMATIC Rack PC IL 43