Introduction; Preface - Siemens simatic PCIL43 Operating Instructions Manual

Introduction

1.1

Preface

1.1
Purpose of this document
These operating instructions contain all the information you need for commissioning and
using the SIMATIC Rack PC IL 43.
It is intended both for programming and testing/debugging personnel who commission the
device itself and connect it with other units (automation systems, further programming
devices), as well as for service and maintenance personnel who install expansions or carry
out fault/error analyses.
Where this documentation is valid
This documentation is valid for all supplied variations of the SIMATIC Rack PC IL 43 and
describes the state of delivery as of September 2005.
Position in the information scheme
The operating instructions are available on the supplied "Documentation and Drivers" CD.
For supplementary instructions on how to handle the software, please refer to the
corresponding manuals.
Conventions
The abbreviation Rack PC or device is also used within this documentation for the product
name SIMATIC Rack PC IL 43.
History
Currently released versions of this operating manual:
Edition
09/05
SIMATIC Rack PC IL 43
Operating Instructions, Edition 09/2005, A5E00432875-01
Remarks
First edition
1
1-1