ZyXEL Communications XOHM MAX-206M2 User Manual page 30

3.
Plug in the modem and connect it to your computer.
Insert the round end of the power adapter into the modem's power port and plug
the other end into a power source. (The Power LED should illuminate.)
Insert one end of the supplied Ethernet cable to your computer and the other
end into the yellow
4.
Check the modem's indicator lights to confirm your WiMAX signal. It may take a
few moments for the signal to find your modem.
If the
WiMAX Signal
signal. Proceed to step 5.
If the
WiMAX Signal
location (nearer a window or away from other electronics). Wait several seconds at
each location to see if you're getting a signal.
If you cannot acquire a WiMAX signal, call
Tip For more information about signal strength, see "XOHM WiMAX Signal Strength" on
page 20.
22 Alternate Method: Install Without the Modem Setup Assistant
port. (The LAN 1 LED should illuminate.)
LAN 1
indicator is solid green, the modem is receiving a WiMAX
indicator is blinking, try moving the modem to a different
WiMAX
Signal
at
XOHM Care 877-333-XOHM
LAN 1 Power
(9646).