Teledyne 4220 Installation And Operation Manual page 195

DECLARATION OF CONFORMITY
Application of Council Directive:
Manufacturer's Address:
Equipment Type/Environment:
Trade Name/Model No:
Standards to which Conformity is Declared:
Standard
EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated RF Immunity
EN61000-4-4 Electrical Fast Transient
EN61000-4-5 Surge on AC Lines
EN61000-4-6 Conducted RF on AC lines
EN61000-4-11 Voltage Dips/Short Interruptions
EN 55022 RF Emissions
EN61000-3-2, 3-3 Harmonic, Flicker
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of July 5, 2001.
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-3212-049
Rev. A
89/336/EEC – The EMC Directive
73/23/EEC – The Low Voltage Directive
Manufacturer's Name: Teledyne Isco, Inc.
4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
4200T Modem
Year of Issue: 2001
EN 55024-1998 EMC Requirements for Information Technology Equipment
EN 60950 Safety Requirements for Information Technology Equipment
FCC Part 68
Description Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m
Level 2 - 2kV on ac lines
2kV common mode,
1kV differential mode
150 kHz to 80 MHz,
3V rms, 80% modulated
0.5 cycle, each polarity/100%
Group 1, Class A, Information Technology
Equipment
Performance Criteria
B
B
A
B
B
B
B