HP Quality Center Synchronizer 1.2 User Manual page 63

6 You can now define how data fields and field values are mapped between
the endpoints. For more information, see "Creating Field Mappings" on
page 66.
Setting Event Options for Requirements Synchronization
After you define basic properties for the link, set scheduling and filter
options, and create requirement type mappings, you define which type of
synchronization is performed on each endpoint.
For each requirement type mapping, one endpoint is selected as master for
the synchronization of records.
The event options for the master and non-master endpoints are summarized
in the following table:
Event Options for
Event
Master Endpoint
Creation When a record is created in the
master endpoint, a
corresponding record is created
in the other endpoint.
Update When a record is updated in the
master endpoint, its
corresponding record in the
other endpoint is updated.
Deletion When a record is deleted in the
master endpoint, the following
options are available:
➤
No action is taken in the
other endpoint.
➤
The corresponding record in
the other endpoint is deleted.
Chapter 3 • Creating Synchronization Links
Event Options for the
Non-master Endpoint
When a record is created in this
endpoint, no action is taken in
the other endpoint.
When a record is updated in this
endpoint, the following options
are available:
➤
No action is taken in the
other endpoint.
➤
The corresponding record in
the other endpoint is
updated.
When a record is deleted in this
endpoint, the following options
are available:
➤
No action is taken in the
other endpoint.
➤
The record is recreated based
on its corresponding record
in the other endpoint.
63