Toshiba e-STUDIO202L Operator's Manual page 306

Hide thumbs Also See for e-STUDIO202L:
Table of Contents

Advertisement

1."Check staple cartridge" (Cont.)
3
Take the empty staple case out of the sta-
ple cartridge.
4
Install a new staple case into the staple
cartridge.
• Insert the new case into the cartridge until you hear a click
sound.
• Do not remove the seal bundling the staples until the new staple
case is installed into the cartridge.
5
Remove the seal bundling the staples
and then pull out the seal straight
upward.
10
6
Install the staple cartridge into the sta-
pler.
• Insert the cartridge until it is caught by the latch and fixed with a
click sound.
If "Check staple cartridge" remains, repeat the above procedure
from steps 1 to 6.
7
Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure
you.
304
10.WHEN THIS MESSAGE APPEARS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents