Proof Copy - Toshiba e-STUDIO202L Operator's Manual

4. Proof Copy

This function allows you to check that the copy density, zoom and margin width, etc. are properly set by
making only one set of copies.
You can prevent miscopying by using this function before committing yourself to mass-copying.
2
• The setting of the number of the copy sets, page number, time stamp, sort/stapling (when the optional
Finisher has been installed) and hole punch (when the optional Hole Punch Unit has been installed)
can be changed after having made the proof copy.
• Press the [MEMORY CLEAR] button to clear the proof copy before changing the setting of the zoom or
copy density, etc. When you make copies again after changing the settings, the data of the originals
need to be scanned.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Select the copy modes as required.
4
Press the [PROOF COPY] button.
• "PROOF COPY is set Press START button to copy" appears (for approx. 2 sec.).
• If "NON-SORT/NON-STAPLE" or "GROUP" is set as the finishing mode, the setting will be changed to "SORT"
automatically.
5
Press the [START] button.
• The data scanning of the originals is started and one set of cop-
ies is made.
86
2.HOW TO MAKE COPIES