Toshiba e-STUDIO202L Operator's Manual page 14

Hide thumbs Also See for e-STUDIO202L:
Table of Contents

Advertisement

General Precautions (Cont.)
Caution
Avoid placing the Multifunctional Digital Systems in a place unsuitable for its weight and also make
sure the surface is level.
Remember that if the Multifunctional Digital Systems falls over, serious injuries could result.
Weight of the Multifunctional Digital Systems: approx. 165.3 lb.
There are 4 adjusters (stoppers) on both sides (2 adjusters each) and 2 safety stoppers in front at the
bottom of the Paper Feed Pedestal and the large capacity feeder. After moving/installing the equip-
ment, be sure to turn and lower the adjusters, and then fix them firmly on the floor. After regulating the
adjuster, fix the safety stopper as well.
Before moving the equipment, turn and raise the safety stoppers and adjusters.
When connecting the optional equipment and interface cable to the Multifunctional Digital Systems, be
sure to turn the power OFF. If the power is not turned off, you could get an electric shock.
To turn the power OFF, see
Do not install the equipment by yourself or try to move it once it has been installed. This could result in
an injury or damage to the device. Contact your service representative if the equipment needs to be
installed or moved.
12
P.40 "Turning power off (Shutdown)".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents