Toshiba e-STUDIO202L Operator's Manual page 270

6.Error Code (Cont.)
Error code
2D60
2D62
2D63
2D64
2D65
2D66
2D67
2D68
8
2DA8
2DC0
2DC1
Store to e-Filing
2B10
2B11
2B20
2B21
2B30
2B31
2B32
268
8.JOB STATUS
Problem
Failed to copy file
Failed to connect to
network destination.
Check destination
path.
Specified network path
is invalid. Check desti-
nation path.
Logon to file server
failed. Check user-
name and password.
There are too many
documents in the
folder. Failed in creat-
ing new document.
Failed to process your
job. Insufficient stor-
age space.
FTP service is not
available.
File sharing service is
not available.
The HDD is running
out of capacity for the
shared folder.
Job canceled.
Power failure
occurred.
There was no applica-
ble job.
Job status failed.
Failed to access file
Message size
exceeded limit or maxi-
mum size
Insufficient disk space
Failed to access e-Fil-
ing
Failed to print e-Filing
document
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Check destination path.
Make sure that the network path is correct, and retry the scan. If
the error still occurs, ask your administrator to confirm whether
the IP address or path of the server is correct. Also make sure
that the server is operating properly.
Make sure you specify correct network folder and retry the scan.
Make sure you specify correct user name and password to
logon the file server and retry the scan.
Delete the data in the local storage folder in the equipment and
retry the scan.
Delete the data in the local storage folder in the equipment and
retry the scan.
Ask your administrator whether the FTP service is configured
correctly.
Ask your administrator whether the SMB protocol is enabled.
Delete the unnecessary data in HDD.
Job was canceled.
Make sure that the power cable is connected properly and it is
inserted securely. Resend the job.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Turn the power OFF and then back ON. Retry the scan. If the
error still occurs, contact your service representative.
Fragment the message into several smaller-sized ones and
send them again.
Delete unnecessary documents in e-Filing and try again.
Make sure that the specified e-Filing or folder exists. (If not, this
error would not occur.). Turn the power OFF and then back ON.
Delete the specified e-Filing or folder and reset them. Retry the
job in error. If the specified e-Filing or folder cannot be deleted,
contact your service representative.
Make sure that the specified document exists. (If not, this error
would not occur.).Turn the power OFF and then back ON.
Delete the specified document. If the specified document can-
not be deleted, contact your service representative.
What to do