Set The Paper Size; Set The Paper Type - Toshiba e-STUDIO195 Operator's Manual

2
Check the menu.
If the paper size has already been registered, the following menu is displayed.
In this case, proceed to step 5.
Ready for bypass
100%
ZOOM FINISHING
If the paper size has not been registered, the following menu is displayed.
In this case, proceed to step 3.
Select paper size
3

Set the paper size.

Press the selecting buttons (Center, Right) to select the size of paper placed in the
drawer. This can also be done with the
e.g.) Setting A4 size
Select paper size
When the paper is other than standard sizes, select "NON_SIZE".
4

Set the paper type.

Press the selecting button (Right) to select paper type. This can also be done with the
or button. Then press the [ENTER] button.
e.g.) Thick paper (81 to 105 g/m
PAPER TYPE
You can select the media type from the following four:
THICK PAPER 1: Thick paper (81 to 105 g/m
THICK PAPER 2: Thick paper (106 to 163 g/m
TRANSPARENCY: Overhead transparencies
PLAIN: Plain paper (64 to 80 g/m
If you select a different media type from the one you placed on the bypass tray, this could
cause a paper jam or the quality of the copied image could be lowered.
1
SORT
EDIT
COMP
13LG
NON_SIZE
or
ST-R
A3
A4
2
)
THICK PAPER1
THICK PAPER2
TRANSPARENCY
2
), tracing paper
button. Then press the [ENTER] button.
2
)
2
), sticker labels
Using Bypass Tray 65