Density Adjustment - Toshiba e-STUDIO195 Operator's Manual

Density Adjustment

This section describes how to switch the mode of the density adjustment.
1
Press the [USER FUNCTIONS] button.
The "user functions mode" main screen is displayed.
2
Select "DEFAULT SETTINGS" with
press the [ENTER] button.
USER FUNCTIONS
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
3
Select "COPY SETUP" with
[ENTER] button.
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
4
Select "LIGHT/DARK" with
[ENTER] button.
COPY SETUP
02.APS/AMS
03.IMAGE MODE
04.LIGHT/DARK
and buttons, and then
1216
and buttons, and then press the
and buttons, and then press the

Density Adjustment

163