Changing Department Names Or Codes - Toshiba e-STUDIO195 Operator's Manual

Changing department names or codes

This section describes how to change the department names or codes already registered. Key
in the master code in the department code entry screen, and then proceed to the following
steps:
1
Press the [USER FUNCTIONS] button.
The "user functions mode" main screen is displayed.
2
Select "DEFAULT SETTINGS" with
press the [ENTER] button.
USER FUNCTIONS
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP
3
Select "GENERAL SETTING" with
press the [ENTER] button.
DEFAULT SETTINGS
01.GENERAL SETTING
02.COPY SETUP
03.FAX SETUP
4
Select "DEPARTMENT CODE" with
press the [ENTER] button.
GENERAL SETTING
04.WEEKLY TIMER
05.SPEAKER VOLUME
06.DEPARTMENT CODE
and buttons, and then
1216
and buttons, and then
and buttons, and then
Department Code 147