Before Making Copies; Default Settings; Confirming Set Functions - Toshiba e-STUDIO195 Operator's Manual

3 COPYING FUNCTIONS

Before Making Copies

Default settings

Initial settings established when the equipment is powered on before any of the user functions
are changed are called default settings. Each setting returns to its default when the power is
turned ON, when the energy saving mode is canceled, and when the [FUNCTION CLEAR] but-
ton is pressed.
The default settings of the basic copying functions at the time of the installation are shown
below.
Item
Copy quantity
Paper selection
Reproduction ratio
Image mode
Density adjustment
The default settings above can be changed. For the details, see the following page:
P.117 "CHANGING EQUIPMENT'S SETTINGS"

Confirming set functions

Press the [SETTINGS] button to confirm the set functions.
The current settings and functions set appear on the LCD screen.
NONSORT
2IN1 1>1 SIMPLEX
Press the selecting buttons (Center, Right) to display all the settings so that the display will be
switched to the next one. This can also be done with the
confirmation, press the [SETTINGS] button again.
68

Before Making Copies

Contents
1 - 999
Automatic paper selection (APS), Man-
ual paper selection
25 - 200%
TEXT/PHOTO, PHOTO, TEXT
Automatic copy density mode, Manual
copy density mode
Default setting at installation
1
Automatic paper selection (APS)
100%
TEXT/PHOTO
Automatic copy density mode
or button. After you finished the