The Osd Help Window - F1 - Tripp Lite 116 User Manual

The 'T' column on the right hand side stands for Type of password.
There can only be 1 Administrator password, 1 Supervisor password, and 6 User
passwords.
To change a user name or password:
1. Navigate to the desired line and column.
2. Type a new user name / password. User authentication is done solely via the
password there is no security significance to the names.
By default the User Profile settings are full access.
4.2.10 The OSD HELP window – F1
To access the HELP window press F1. The HELP window appears see Figure 20.
Please note! All the functions set out in the Help window are performed from the
Main window. The Help window is merely a reminder of the hotkeys and their
functions.
SMART CAT5 SWITCH – 108/116
Figure 19 Security settings window
Figure 20 HELP window
23