Smart Cat5 Manager Version Number; Roc/Ricc Version Number; Updating The Firmware - Tripp Lite 116 User Manual

6.5.1.2 Smart CAT5 Manager version number

To verify the Smart CAT5 version number:
1. In the Switch Unit box, check the Smart CAT5 Manager option.
2. Click
box.
3. Click
box.

6.5.1.3 ROC/RICC version number

To verify the RICC version number:
1. Before you can check a ROC/RICC, you must uncheck the Switch Unit box
options.
2. Check one or more or all of the ROC/RICCs.
3. Click
ROC/RICC number.
4. Click
ROC/RICC number.
When "Not responding" appears, there is no computer connected, or it is switched
off.

6.5.2 Updating the firmware

Warning!
Never switch off any computer connected to the Smart CAT5 system during the
updating process.
To update the firmware:
1. In the Smart CAT5 Switch Update window, check the appropriate option in the
Switch Unit box or the desired RICC/ROC.
2. From the File menu, choose Open. The Open box appears. See Figure 30.
3. Navigate to the folder that contains the firmware update file. You may only see
the files that match the file selection mask. When the firmware is contained in a
Firmware Package, select the package. The package comes with a .min
extension. The correct firmware is automatically selected according the Switch
or RICC/ROCC chosen in step 1 above. The file extension for specific devices
is .hex.
USER GUIDE
. The firmware version number appears in the Switch Unit
. The hardware version number appears in the Switch Unit
. The firmware version number appears after the
. The hardware version number appears after the
36