ZyXEL Communications Prestige 2864I User Manual page 57

6. My Password - Enter the password associated with the login
7. Single User Account - See the following section for a more
8. Telco Options: Transfer Rate - This field (which only applies
9. Press ENTER at the message: Press ENTER to Confirm ... to
10. At this point, the SMT will ask if you wish to test the Internet
44 Configuring for Internet Access
name above. Note that this login name/password pair is only for
the Prestige to connect to the ISP's gateway. When you use
TCP/IP applications, e.g., FTP, to access the Internet from your
workstation, you will need a separate login name and password
for each server.
detailed discussion on the Single User Account feature. The
default is No.
to outgoing calls) controls the rate at which the data is
transferred between your Prestige and the Internet. There are
four options for this field:
64K - The Prestige will place 64Kbps (bits per second)
digital data calls. (Default)
Modem - The Prestige will place Modem data calls.
X.75 - (for the DSS1 and 1TR6 only) The Prestige will
place X.75 digital data calls.
V.120 - (for the DSS1 and 1TR6 only) The Prestige will
place V.120 digital calls.
56K - (For the North America only) The Prestige will place
56Kbps digital data calls.
DOVBS - (For the North America only) The Prestige will
place 56Kbps Data Over Voice Bearer Service (DOVBS)
call. Some phone companies in North America charge less
if calls are made using DOVBS.
confirm your selections, or press ESC at any time to cancel
your selections.
connection. If you select Yes, the Prestige will call the ISP to