Removal And Replacement - Vax Essentials VEC-01 Instruction Manual

Vax VEC-01&02 User Guide.qxd
5. Accessories
The accessories can be attached directly to the handle by
removing the telescopic tube and pushing in the desired
accessory.
The accessories can also be attached to the telescopic
tube for extra reach. Remove the combination floor head
and push on the desired accessory.
NOTE: The 2-in-1 tool and crevice tool are stored
underneath the vacuum cleaner lid behind the dirt
container.
2-in-1 Tool
Dusting brush: for delicate surfaces.
Crevice tool: for crevices, corners and cracks, etc.
Upholstery Tool
For carpet, upholstery, stairs, etc.
TurboTool
(Model: VEC-02 only)
For pet hair, stair and upholstery cleaning (NOTE: Do not
use the TurboTool on suede and leather surfaces).
27/9/07 17:17 Page 5
6. Dirt Container & Filter:

Removal and Replacement

NOTE: Before emptying the dirt container and
removing or replacing any filters the hose must be
removed from the vacuum.
Press and hold in the latches on the side of the hose
connector (Fig.6/1).
Fig.6/1
Rotate the connector 90° anti-clockwise until the arrows
on the connector line up with the inlet recesses and
remove the hose from the unit (Fig.6/2).
Fig.6/2
WARNING: Always unplug the vacuum cleaner
!
from the electrical outlet before removing the
dirt container.
WARNING: Do NOT use the vacuum cleaner
!
without ALL of the filters in place.
NOTE: For best performance, replace filters annually.
Emptying the Dirt Container
Press the button on the front of the vacuum cleaner to
open the vacuum cleaner lid. Lift out the dirt container by
the handle. (Fig.6/3)
Vax Careline
accessories / dirt container & filter
0870 606 1248
5