Table of Contents
Advertisement
Vax VEC-01&02 User Guide.qxd
www.vax.co.uk
8. Storage
IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet and rewind the power
cord as directed before storing.
NOTE: Always store the vacuum cleaner base down.
8
storage / troubleshooting
27/9/07
17:17
Page 8
9. Troubleshooting
WARNING: To reduce the risk of personal injury,
!
unplug the vacuum cleaner before performing
maintenance or troubleshooting checks.
PROBLEM: Vacuum cleaner won't run
Cause:
Solution: Plug in securely.
Cause:
Solution: Check fuse or breaker.
Cause:
Solution: Push on/off switch to 'on' .
Cause:
Solution: Switch off and unplug the vacuum cleaner.
Cause:
Solution: Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up/loss of suction.
Cause:
Solution: Review dirt container replacement.
Cause:
Solution: Empty dirt container.
Cause:
Solution: Remove, clean and replace filters.
PROBLEM: Accessories won't pick up.
Cause:
Solution: Refer to section 5.
Cause:
Solution: Refer to section 7.
Cause:
Solution: Refer to section 7.
Not properly plugged into electrical outlet.
No electricity in the electrical outlet.
On/off switch not turned on.
Motor thermostat has tripped.
Leave for one (1) hour before switching the
vacuum cleaner back on.
Blown fuse/tripped breaker.
Dirt container not installed properly.
Dirt container full or blocked.
Clogged filters.
Accessories are not attached correctly.
TurboTool is clogged.
Hose is not installed correctly.
Advertisement
Table of Contents
