Table of Contents
Advertisement
U90-MXP Series User Guide - 04.10.qxd:User Guide
vax.co.uk
5. Dirt container & filter:
removal & replacement
WARNING: to reduce risk of injury from moving
!
parts - unplug before servicing.
Press dirt container removal button and lift dirt container
from cleaner (Fig.5/1).
Fig.5/1
Hold dirt container inside rubbish bin (Fig.5/2) and press
dirt container quick release button to empty (Fig.5/2). Tap
the dirt container on the inside of rubbish bin to remove
excess dust.
Fig.5/2
Wipe inside of dust container and shroud with a damp
cloth to remove excess dust.
Remove foam filter
Press tab on bottom of foam filter cover and pull to remove
(Fig.5/3).
Fig.5/3
6
dirt container and filter
1/4/10
17:41
Clean foam filter
Fig.5/4
Separate the filter assembly by removing the foam filter
from its plastic housing (Fig 5/4). Tap the foam filter on
the inside of a rubbish bin to remove excess dust and dirt
from filter.
Wash foam filter
Hold foam filter under running water to wash (40° C max).
Ring excess water out of filter. Allow filter to dry for at
least 24 hours before replacing in filter cartridge (Fig.5/5).
Replace foam filter
Return foam filter to cleaner
and snap into place. Replace
foam filter cover and snap
into place to secure
(Fig.5/6)..
Fig.5/6
NOTE: The filter housing also needs to be washed
regularly with cold water and dried thoroughly before
replacing and restarting the vacuum cleaner.
Page 6
!
40° C max
Fig.5/5
Advertisement
Table of Contents
