Table of Contents
Advertisement
Vax VZL 401CSP User Guide.qxd:VZL-401CSP User Guide
Fig.6/7
Replace all six (6) screws to secure nozzle guard (Fig.6/8).
Fig.6/8
7. Lightbulb: removal and
replacement
Please contact Vax on 0870 606 1248 for further
advice.
IMPORTANT: Do not attempt to remove or replace the
lightbulb yourself.
All manuals and user guides at all-guides.com
belt or brush bar / lightbulb removal and replacement
3/9/08
16:43
8. General maintenance
WARNING: To reduce risk of injury from moving
!
parts - unplug before servicing.
Debris removal/nozzle guard
• Check to see if dirt container is full; empty if needed.
• Plug cleaner in and check to see if there is any suction
at end of hose.
1. Unwrap hose from caddy. Twist and unlock to remove
clogs. Clean out hose with a broom handle. Check access
door on back of cleaner (near hose end). Remove the
seven (7) screws and check for obstruction (Fig.8/1).
Fig.8/1
2. Remove dirt container (Pg. 6) and check dirt container
inlet located on cleaner.
3. Remove nozzle guard by removing the three (6) screws.
Remove obstructions (Refer to Page 8 for belt and
brushbar removal and replacement).
Fig.8/2
Debris removal/Turbo Tool
Rotate locking ring 180
o
and turn Turbo Tool over
(Fig.8/3).
Fig.8/3
Page 9
Vax Careline
0870 606 1248
LOCKING RING
9
Advertisement
Table of Contents
