The Meter Structure - UNI-T UT208A Operating Manual

The Meter Structure

① Hand Guards: to protect user's hand from
touching the dangerous area.
② Trigger: press the lever to open the
transformer jaws. When the pressure on
the lever is released, the jaws will close.
③ Functional Buttons
④ Input Terminals
⑤ LCD Display
⑥ Rotary Switch
⑦ Transformer Jaw: designed to pick up
the AC and DC current flowing through
the conductor. It could transfer current
to voltage. The tested conductor must
vertically go through the Jaw center.
(see figure 1)
10
UT207A/208A/209A Operating Manual
Figure 1