UNI-T UT208A Operating Manual page 46

UT207A/208A/209A Operating Manual
Make sure the transformer jaw and the tets leads are disconected from the circuit
being tested before opening the case bottom.
To replace the battery:
1. Turn the Meter off and remove all the connections from the input terminals
2. Turn the Meter's front case down.
3. Remove the screw from the battery compartment, and separate the battery
compartment from the case bottom.
4. Take out the old battery and replace with a new 9V battery (6LF22, 1604A).
5. Rejoin the case bottom and the battery compartment, and reinstall the screw.
This operating manual is subject to change without notice
45