UT207A/208A/209A Operating Manual
Functional Buttons
Below table indicated for information about the functional button operations.
Button
Press SELECT button to select the alternate functions including
SELECT
V
Range feature:
Exit AUTO and enter MANUAL ranging.
RANGE
In MANUAL, select next input range. EXIT to return to AUTO.
AUTO is default.
Press once to turn the display backlight on. Press again to turn
the display backlight off, otherwise it will automatically off after
15 seconds.
● Press HOLD to enter the Hold mode in any mode (except
%Hz), the Meter beeps.
HOLD
● Press HOLD again to exit the Hold mode to return to
measurement mode, the Meter beeps.
● Turn the rotary switch or press any button can also exit hold
mode.
Operation Performed
, A
and
. (
13
Ω
UT208A only)