Cooking - TurboChef SOTA NGO Owner's Manual

8

COOKING

Cooking
The oven is preprogrammed with recipe settings at the time of manufacture and is ready to operate out of
the box. If these settings are erased, new menu settings must be either loaded via smart card (page 13) or
programmed manually (pages 14-15).
Note that the steps below are not always sequential. Typically, multiple items are cooked before cooling
the oven (Step 10).
Step 1: Turn the Oven On
Figure 5: Oven Off
Step 2: Select Cook Temperature
Figure 6: Select Cook Temperature
NoTE: If both temperature settings are the same, this screen will be bypassed and access to all food items
will be allowed.
Step 3: Warming Up
Figure 7: Warming Up
The oven will not cook unless settings are present.
TURBOCHEF NGO
OVEN OFF
REA DY TO C LEA N
S ELEC T COOK TEM PERATU RE
T EM P 1 : 50 0F
T EM P 2 : 35 0F
WARMING UP
OVEN CC = 4 33 F
O VEN SP = 5 00F
When the oven is off (Figure 5), the oven temperature
has receded below 150°F (66°C), but the display and
keypad remain on.
Press the on/off key to turn the oven on.
The oven stores two different cook temperature settings
(see page 14 for more information). only items
associated with the selected temperature setting can be
cooked without re-specifying the temperature setting.
To select a temperature, press the adjacent soft key.
During this step, the oven warms to the selected or
pre-set temperature.