Turn Signal Lights
2
1
T908051
1
Turn Signal Lens Screw
2
Bulb
Bulb Replacement
•
The lens on each turn signal light is
held in place by screws.
•
Release the screws and remove the
lens to gain access to the bulb for
replacement.
Maintenance and Adjustment
Cleaning
Frequent, regular cleaning is an essential part
of the maintenance of your motorcycle. If
regularly cleaned, the appearance will be
preserved for many years. Cleaning with cold
water containing an automotive cleaner is
essential at all times but particularly so after
exposure to sea breezes, sea water, dusty or
muddy roads and in winter when roads are
treated for ice and snow. Do not use
household detergent as the use of such
products will lead to premature corrosion.
Although,
under
the
terms
motorcycle warranty, cover is provided
against the corrosion of certain items, the
owner is expected to observe this reasonable
advice which will safeguard against corrosion
and
enhance
the
appearance
motorcycle.
Preparation for Washing
Before washing, precautions must be taken
to keep water off the following places.
•
Rear opening of the exhausts: Cover
with a plastic bag secured with rubber
bands.
•
Clutch
and
brake
housings on the handlebar: Cover with
plastic bags.
•
Ignition switch and steering lock: Cover
the keyholes with tape.
Remove any items of jewelry such as rings,
watches, zips or belt buckles, which may
scratch or otherwise damage painted or
polished surfaces.
Use separate cleaning sponges or cleaning
cloths for washing painted/polished surfaces
and chassis areas. Chassis areas (such as
wheels and under mudguards) will be
exposed to more abrasive road grime and
of
your
of
the
levers,
switch
97